Extracting Data Blocks - Denso QB30-SR User Manual

2d code scanner (fixed type)

Table of Contents

8.2.1.2

Extracting data blocks

If data read is in the comma-delimited CSV format, the scanner extracts data blocks specified by the data block numbers from

a code specified by the "Code type" and then outputs it in the data transmission format selected in the scanner (see Chapter 9,

Section 9.4). The extraction conditions and data bock numbers are listed below.

 Extraction conditions

Extraction conditions

"Code type"

"Data transfer regardless of error

result"

If the scanner fails to extract a data block or scans a code not specified by "Code type" when the "Data transfer regardless of

ror result" is permitted, then it outputs the data read as is without editing.

 Data block numbers

Each data block number should be within the range from 1 through 99. Up to three blocks can be extracted.

Choices

Any code

QR Code

iQR Code

PDF417

Data Matrix

MaxiCode

Aztec

UPC-A/EAN-13

UPC-E

EAN-8

Code 128

GS1-128 (EAN-128)

Codabar (NW-7)

Code 39

Code 93

Interleaved 2of5 (ITF)

GS1 DataBar (RSS)

EAN.UCC

Composite

symbology

Permit/Prohibit

Table of Contents

Qb30-su