Chapter 17 Qr-Coded Parameter Menu; Parameter Setting Procedure Using The Qr-Coded Parameter Menu - Denso QB30-SR User Manual

Chapter 17 QR-Coded Parameter Menu

17.1 Parameter Setting Procedure Using the QR-coded Parameter Menu

Start setting Use the scanner to scan the "Start setting" QR Code symbol.
 Three beeps
Scan parameter
setting QR Code Scan necessary parameter setting QR Code symbols.
symbols.

End setting Scan the "End setting" QR Code symbol.
Three beeps
Scanning the "All defaults" QR Code symbol in the QR-coded parameter menu makes all items in the menu revert to the
factory default.
17.2 Parameter Setting Procedure Using the QR-coded Parameter Menu
Control command (See annex 2) enables to limit to use QR Code menu. The setting change can not be made with the QR Code
menu (including the QR Code for batch setting) while the use of QR Code menu is limited. However, even though the use of
QR Code menu is limited, the setting changes can be made with commands/ configuration software (QB setting) with the
limitation on the use of QR Code menu cancelled.
97