Denso QB30-SR User Manual page 36

Extraction start and end positions

"Extraction start position"
Head position
Tail position
nth position
The n can be 1 through 9999. Note that if the extraction start position is specified as nth position, the extraction end position
should be equal to or greater than the extraction start position.
Note: The number of characters for Code 39 symbols should be specified including start and stop codes.
Example Code read: QR Code, Data: 12345,
Header: STX, Terminator: ETX, Scanner ID: Disable, Code ID mark: Type 1,
Transmission of the number of digits: Enable, Prefix/Suffix: None, BCC: Disable
Extraction conditions
"Code type": QR Code
"Data transfer regardless
of error result": Prohibit
"Code type": QR Code
"Data transfer regardless
of error result": Permit
"Code type": PDF417
"Data transfer regardless
of error result": Prohibit
"Code type": PDF417
"Data transfer regardless
of error result": Permit
"Extraction end position"
nth position
Tail position
By n positions from the start
position
nth position
Extraction end
Extraction start position
Head position 3rd position
Tail position 3rd position
1st position Tail position
1st position By 3 positions
2nd position 4th position
Head position 6th position
Tail position 6th position
6th position Tail position
6th position By 10 positions
1st position 6th position
Head position 6th position
Tail position 6th position
6th position Tail position
6th position By 10 positions
1st position 6th position
Invalid
Invalid if specified.
specified.
Invalid
Invalid if specified.
specified.
Output data
position
[STX]Q0003123[ETX]
[STX]Q0003345[ETX]
[STX]Q000512345[ETX]
[STX]Q0003123[ETX]
[STX]Q0003234[ETX]
Error
Error
Error
Error
Error
[STX]Q000512345[ETX]
[STX]Q000512345[ETX]
[STX]Q000512345[ETX]
[STX]Q000512345[ETX]
[STX]Q000512345[ETX]
if
Error
if
[STX]Q000512345[ETX]
25