Data Blocksorting Mode - Denso QB30-SR User Manual

8.2.3

Data blocksorting mode

The scanner splits code data read into a maximum of 5 blocks at the specified split positions, sorts those blocks in the specified
order, and outputs it in the data transmission format selected in the scanner (see Chapter12, Section 12.4).
Note: The split position must be specified by the number of digits from the head of code data read. Specifying the number of
digits exceeding that in the code data results in an error.
 Blocksorting conditions
Blocksorting conditions
"Code type"
Example Code read: Code 128, Data: 1234567890,
Header: STX, Terminator: ETX, Scanner ID: Disable, Code ID mark: Disable,
Transmission of the number of digits: 4 digits, Prefix/Suffix: None, BCC: Disable
Split position
3rd position, 8th
position
3rd position, 8th
position
Choices
Any code
QR
iQR Code
PDF417
Data Matrix
MaxiCode
Aztec
UPC-A/EAN-13
UPC-E
EAN-8
Code 128
GS1-128 (EAN-128)
Codabar (NW-7)
Code 39
Code 93
Interleaved 2of5 (ITF)
GS1 DataBar (RSS)
EAN.UCC Composite
symbology
Order of blocks
Block 2, 1, 3 [STX]K00104567812390[ETX]
Block 1, 3 [STX]K000512390[ETX]
Output data
36