Denso QB30-SR User Manual page 98

Code 39
Item
Reading Code 39
Minimum number of readable
digits
for Code 39
Maximum number of readable
digits
for Code 39
Transmission of Start/Stop codes
for Code 39
Conversion to FULL ASCII
The parameter setting ranges are different from the numbers of digits that the scanner can actually read.
(Note 1)
Code 128, EAN-128 (GS1-128)
Items
Reading Code 128
Reading EAN-128 (GS1-128)
Minimum number of readable
digits
for Code 128
Maximum number of readable
digits
for Code 128
Transmission of FNC1 for Code
128
Minimum number of readable
digits
for EAN-128 (GS1-128)
Maximum number of readable
digits
for EAN-128 (GS1-128)
Transmission of FNC1 for
EAN-128 (GS1-128)
Using the QR-coded parameter menu enables or disables scanning of both Code 128 and EAN-128 (GS1-128)
(Note 2)
at the same time.
Parameters
Enable, without a check digit
Enable, with a check digit
(Check digit transmission enabled)
Enable, with a check digit
(Check digit transmission disabled)
Disable
1 to 99 digits
(excluding start/stop codes)
Enable
Disable
Enable
Disable
Parameters
Enable
Disable
Enable
Disable
1 to 99 digits
(excluding start/stop codes and
1-digit check digit)
Disable
Transmit GS
1 to 99 digits
(excluding start/stop codes and
1-digit check digit)
Disable
Transmit GS
87
Defaults

Chapter 12
Section 12.4
1 digit
99 digits
Chapter 12

Section 12.4

Defaults

Chapter 12
Section 12.4

1 digit
99 digits

1 digit
99 digits

Refer to:
Refer to: