Table of Contents
Advertisement
Chapter 13 QR-Coded Parameter Menu for Scanners
13.1 Customizing the Scanner with the QR-Coded Parameter Menu
Start setting
Three beeps
Scan parameter setting
QR Code symbols.
End setting
Three beeps
Scanning the "All defaults" QR Code symbol from the QR-coded parameter menu makes all items in the menu revert
to the factory defaults.
Use the scanner to read the "Start setting" QR Code symbol.
Note: Setting the "Beeper volume" does not require this step; however, it requires
enabling the Bluetooth
If the Bluetooth
interface is disabled with the "End operation" QR Code symbol, scan
the "Start operation" QR Code symbol to enable the interface.
Scan necessary parameter setting QR Code symbols.
Scan the "End setting" QR Code symbol.
interface with the "Start operation" QR Code symbol.
65
Advertisement
Table of Contents
