Chapter 13 QR-Coded Parameter Menu
13.1 Parameter setting procedure using the QR-coded parameter menu
Start setting
↓ The beeper sounds three times.
Scan parameter setting
QR Code symbols.
↓
End setting
The beeper sounds three times.
Scanning the "All defaults" QR Code symbol in the QR-coded parameter menu makes all items in the menu revert to
the factory defaults.
TIP: "Beeper volume" QR Code symbol in the QR-coded parameter menu
The beeper volume can be set even if the above procedure is omitted. No "Start setting" or "End setting" QR Code
symbol is required to be scanned.
Each time the "Beeper volume" QR Code symbol is scanned, the beeper volume cycles through High, Medium and
Low. The factory default is High.
Use the scanner to scan the "Start setting" QR Code symbol.
Scan necessary parameter setting QR Code symbols.
Scan the "End setting" QR Code symbol.
73