Altigen Alti-IP 600 Administration Manual page 43

Soft Keys Quickly performs a
specified function
1 - 10
(Busy Lamp Field,
AltiServ Feature Code,
Phone Setting or Speed
Dial) previously
configured by the
System Administrator.
(Soft key #6 is
configured as FLASH
by default. All other
soft keys are set to
Phone Setting by
default.)
Speaker Enables use of speaker
phone.
Speed Quickly dials a
Dial specified number that
has been previously
stored.
Transfer Transfers an active call
to another number.
(XSFR)
Voice Enables access to voice
Mail messages.
(VM)
• In AltiAdmin, go to Extension
Configuration >Station Speed
and enter the Speed Dial entries
for the appropriate extension(s).
Then, go to AltiGen IP Phone
Configuration on the
Management Menu, go to the
desired extension, and set the
appropriate soft key to the
desired function (BLF, Feature
Code, Phone Setting, Speed
Dial).
• Feature does not require special
configuration to work.
• In AltiAdmin, go to Extension
Configuration >Station Speed
and enter the Speed Dial entries
for the appropriate extension(s).
Then, go to AltiGen IP Phone
Configuration on the the
Management Menu, go to the
desired extension, and set the
appropriate function key to
Speed Dial and enter the speed
dial code in the field below.
• Feature does not require special
configuration to work.
• You cannot use this button to
"flash" after using it to transfer
a call. If you want to reconnect
to a call after using the XSFR
button, you must use the
$(BACK key).
• The VM count that appears in
the LCD displays new messages
(previously heard messages are
not included).
Alti-IP 600 Administration Manual 31