Network Settings - Altigen Alti-IP 600 Administration Manual

TFTP Server
System>TFTP Server
{Save TFTP Server IP
Address}
Boot
System>Boot
Download
Download
Version
System>Version
Information Info {Read only, version
information}

Network Settings

Setting
Enable DHCP
Network>Enable
DHCP
Local
Network>Local
Address
Address
Network
Network>Network
Mask
Mask
Gateway
Network>Gateway
Enable
Network>Enable/
Gatekeeper
Disable
GateKeeper
Alti-IP 600 Administration Manual
Menu Path {Sub Menu}
Sets the TFTP server IP address for
updating firmware.
After firmware image upgrade,
submenu changes to {No}. Used
mainly for upgrading or
troubleshooting. On the next boot,
the phone will download the new
firmware from the TFTP server, if
set to [YES].
Note: Make sure to launch
TFTP32.exe.
When downloading, the
phone key pad is disabled.
Indicates the version number of the
IP Phone.
Description
Set YES or NO to indicate whether
Dynamic Host Configuration
Protocol (DHCP) is being used by the
IP phone to retrieve new IP address
upon boot up.
Sets the IP phone's local address;
only shows if DHCP is disabled.
Sets the IP phone's network mask;
only shows if DHCP is disabled.
Sets the Gateway IP address.
Set whether GateKeeper is enabled or
disabled.
22