Hapter; Installation; Manual Setup - Altigen Alti-IP 600 Administration Manual

Hide thumbs Also See for Alti-IP 600:

Table of Contents

These steps describe procedures for installing and configuring the Alti-IP

600 locally — through manual setup or plug and play. To install and

configure the phone remotely, refer to "Remote Installation" on page 15.

To manually set up the Alti-IP 600 phone, perform the following steps:

Network Setup

Find out the settings for the following (this information will be needed

later to configure the Alti-IP 600):

• AltiWare Server IP Address

• DHCP - if DHCP is not used, obtain the Alti-IP 600 phone's IP

address from the System Administrator.

• Gatekeeper Auto Discovery - if gatekeeper auto discover is not

used, obtain the AltiWare IP address.

• Firewall - Refer to "Firewall Considerations" on page 34.

AltiAdmin/ACM Admin Setup - AltiGen IP Phone Configuration

Window

To configure the Alti-IP 600 phone with AltiAdmin/ACM Admin,

select AltiGen IP Phone Configuration from the Management

menu.

Alti-IP 600 Administration Manual 7

H A P T E R

Table of Contents

Show Quick Links

Table of Contents

Need help?

Do you have a question about the Alti-IP 600 and is the answer not in the manual?