Altigen Alti-IP 600 Administration Manual page 31

• The user should reboot the Alti-IP 600 after disconnecting the LAN
cable to the phone.
• The user should reboot the Alti-IP 600 after changing the IP address or
DHCP setting.
• If the Alti-IP 600 is configured for a public IP address, you can call
other public IP address devices.
• If the Alti-IP 600 is configured for a private IP address, you can call
other private IP address devices that you can "see" or that are on your
subnet.
• The daisy chaining of Alti-IP 600 phones is not supported.
Alti-IP 600 Administration Manual 19