Altigen Alti-IP 600 Administration Manual page 21

The left side of the IP Phone Configuration window displays all the
Alti-IP phone extensions that have been set up in the system. After
creating the IP extensions, you can set the following parameters:
Parameter Description
Soft Key 1 - 10 Corresponds to the 10 soft keys on the Alti-IP 600. Use the
drop down list to assign one of the following functions to the
desired keys:
• Disabled - when selected, the corresponding soft key
• BLF (Busy Lamp Field) - when selected, enter an
• Feature Code - when selected, enter an AltiServ feature
• Speed Dial - when selected, enter the speed dial code in
• Phone Setting - when selected, the IP phone user will be
Note: Upon initial installation, the lower left soft key is set
cannot be used.
extension number in the field below; this will be
associated with the corresponding soft key to
automatically dial this extension number; the button light
next to this soft key indicates that the extension number
is busy. You can select the Play Beep Tone check box to
also have the IP phone play an audible beep when the
extension number is ringing.
Note: The BLF feature can only be used for internal
extension numbers, not outside numbers.
code in the field below; this will be associated with the
corresponding soft key to dial this feature code.
the field below; this will be associated with the
corresponding soft key to dial this speed dial code.
able to program the corresponding soft key, as a speed
dial or feature code key, directly from the IP phone (using
* * 6, then ENTER).
up as FLASH by default. This key can be re-assigned
in the AltiGen IP Phone Configuration window.
No other soft keys can be configured to FLASH. All
other soft keys are initially defaulted to Phone
Setting.
Alti-IP 600 Administration Manual 9