525/625 Switchable Function - Sony DNW-A100 Maintenance Manual
Digital video hybrid recorder
Hide thumbs
Also See for DNW-A100:
- Maintenance manual (506 pages) ,
- Operation manual (134 pages) ,
- Brochure & specs (14 pages)
Table of Contents
Advertisement
1-14. 525/625 Switchable Function
Set the ITEM-013 to ON and change the mode following message which is superimposed on the video
monitor.
(It is necessary that the CHARACTER switch of the sub control panel is set to ON so that the message is
superimposed on the video monitor.)
n
It is required to power off and on again to change the mode after setting. (Turn off the power following
message which is superimposed on the video monitor.)
Importance
If the mode is changed, the signal that had recorded on the HDD is erased.
In the NTSC model (DNW-A100/A50/A45)
After the setting is complete, the unit operates in 625/50 mode. Therefore, the signal of 625/50 system
(except the analog composite video input) can be recorded on the tape by Betacam SX format, and the
tape recorded based on the Betacam SX format of 625/50 system can also be played back. The signal of
625/50 system is output from all output connectors.
m
. Betacam/Betacam SP format of 625/50 system cannot be played back in this unit.
. Analog composite video signal of 625/50 system cannot be recorded in this unit.
. External reference video signal of 625/50 system can be locked by the sync signal only, but cannot be
locked by color framing in this unit.
In the PAL model (DNW-A100P/A50P/A45P)
After the setting is complete, the unit operates in 525/60 mode. Therefore, the signal of 525/60 system
(except the analog composite video input) can be recorded on the tape by Betacam SX format, and the
tape recorded based on the Betacam SX format of 525/60 system can also be played back. The signal of
525/60 system is output from all output connectors.
m
. Betacam/Betacam SP format of 525/60 system cannot be played back in this unit.
. Analog composite video signal of 525/60 system cannot be recorded in this unit.
. External reference video signal of 525/60 system can be locked by the sync signal only, but cannot be
locked by color framing in this unit.
DNW-A100/A50/A45
DNW-A100P/A50P/A45P
1-14. 525/625 Switchable Function
1-27
Advertisement
Table of Contents
