Meiko EcoStar 545D-M Operating Instructions Manual page 44

Short Operating instruction EcoStar 545 D-M
1. Preparation for washing and rinsing
Open the hood.
Place the screen on suction and stand pipe in position.
Close the hood.
Switch on the appliance by pressing one of the program pre-selection keys.
Check level and if necessary refill detergent and rinse aid
The machine is ready for operation when flash light of pre-selector button
stops
2. Operation during washing and rinsing cycle
Place the items in the basket.
Place the basket in the appliance.
Close the hood.
Program I for normal soiled dishes.
Program II for normal soiled dishes.
Program III (press I+II) for heavily soiled dishes.
Press the program start key or press down the hood rod.
The appliance washes and rinses automatically and switches off the wash
program after completion. When the light goes out, open the hood and
remove the basket.
3. Shutting down the appliance
Press the "0" button (Off button). The machine is switched off when all the
lights are out
Open the hood and remove the stand-pipe
If the appliance has a built-in waste water pump, the program start button
must be pressed to empty the tank.
The tank interior is sprayed with clean hot water after the tank water has been
drained. The hood must remain closed. The waste water pump switches off
automatically.
Clean tank, strainers and wash arms
4. Regeneration
A red lamp indicates that the capacity of the water softener is nearly
exhausted
Carry out the regeneration process according to the operating instructions
Operating panel
reservoirs.