Meiko EcoStar 545D-M Operating Instructions Manual page 28

Operating instructions EcoStar 545 D-M
Datei:1_EcoStar545D-M_9662798_Betriebsanleitung_EN_2009-05.doc
MEIKO Maschinenbau GmbH & Co. KG, Postfach 2040, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
You can leave this level by pressing the "0" key.
16.3.7 Viewing / modifying parameters: (depending on the code en-
tered)
Indication
this display by pressing the "accept" key.
Now, the first parameter will be displayed with a value.
Press the "I" key to move forwards or press the "II" key to move backwards, until the pa-
rameter you require is displayed.
Confirm the parameter to be modified by pressing the "accept" key, the value will flash.
Increase the value using the "I" key or reduce it using the "II" key and confirm with the
"Accept" key.
You can leave this level by pressing the "0" key.
See 15.4 for list of parameters
16.3.8 Viewing input status:
Indication
this display by pressing the "accept" key.
Now, the first digital input will be shown, with status.
Press the "I" key to move forwards and the "II" key to move backwards, until you reach
the input you require.
Display: input set
Display: input not set
You can leave this level by pressing the "0" key.
Update:2009-12-18 MRL
W e reserve the right to change execution and construction!
.
9662798
28/42