Meiko EcoStar 545D-M Operating Instructions Manual page 26

Operating instructions EcoStar 545 D-M
Datei:1_EcoStar545D-M_9662798_Betriebsanleitung_EN_2009-05.doc
MEIKO Maschinenbau GmbH & Co. KG, Postfach 2040, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
16.3.1 View/modify parameters
Indication
this display by pressing the "accept" key.
Now, the first parameter will be displayed with a value.
Press the "I" key to go forwards and the "II" key to go backwards, until the parameter you
require is displayed.
Confirm the parameter to be modified by pressing the "accept" key, the value will flash.
Increase the value using the "I" key or reduce it using the "II" key and confirm with the
"Accept" key.
You can leave this level by pressing the "0" key.
See 15.4 for list of parameters
16.3.2 Ventilating the rinse aid inlet
this display by pressing the "accept" key.
Now the dosage pump will be activated and the remaining running time will be indicated.
You can leave this level by pressing the "0" key. The ventilation will be interrupted off.
16.3.3 Ventilating the detergent inlet
this display by pressing the "accept" key.
Now the dosage pump will be activated and the remaining running time will be indicated.
You can leave this level by pressing the "0" key. The ventilation will be interrupted off.
Should the ventilation process be insufficient, repeat the process.
Update:2009-12-18 MRL
W e reserve the right to change execution and construction!
26/42
9662798