Information Indicator - Meiko EcoStar 545D-M Operating Instructions Manual

Hide thumbs Also See for EcoStar 545D-M:
Table of Contents

Advertisement

Operating instructions EcoStar 545 D-M
Figure 2: Information display
Information displays can be cleared by pressing the confirmation key.
Provided that the machine function is restored, the next program sequence will begin.
The information display can also be deleted by pressing the "Off" key.
Information indicator (extract)
Table 2: Information displays
Datei:1_EcoStar545D-M_9662798_Betriebsanleitung_EN_2009-05.doc
MEIKO Maschinenbau GmbH & Co. KG, Postfach 2040, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1121
Info No.
Description
120
Emergency program active
Restricted washing possible.
121
Hood not closed
122
Incorrect password /
no authorization
123
Factory setting parameter list
420
Shortage of rinse aid
520
Shortage of detergent
521
Shortage of detergent with dosing
system ADT
522
Error in the dosing system ADT
720
Regeneration in progress
723
Regeneration necessary
Update:2009-12-18 MRL
W e reserve the right to change execution and construction!
Possible cause
No boiler / tank heating
No fresh water supply
Check system
Check connection S1
Change microswitch
Check microswitch adjustment
Replacing a defective I/O circuit board
Enter code once again
Switch power supply ON/OFF within 5
and set parameters back
to factory settings. This will be
rejected and parameters will be re-
Information 123 will disappear
If the machine is ready for operation, a
shortage of rinse agent will be signalled
(only if there is a built-in warning sys-
tem).
If the machine is ready for operation, a
shortage of detergent will be signalled
(only if there is a built-in warning sys-
tem).
Impulses of the flow meter are recog-
nized, although the detergent dosing is
not approached. Valve of the dosing unit
is not closing.
Impulses of the flow meter are recog-
nized, although the detergent dosing is
not approached.
Valve of the dosing unit is not closing.
Regeneration program has started and
is in progress. (It is possible to pause
the program, but not cancel it.)
The user must start the regeneration.
(empty tank, add salt!)
9662798
35/42

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents