Calling A Remote Party By Using The Connect Menu - Sony PCS-XG80 Operating Instructions Manual

?
? 1
/ (power) indicator
The indicator on the System starts flashing, then lights in green when the
power is on.
The Home menu appears on the monitor screen and the picture shot by the
local camera also appears.
Notes
• After the power is turned on, the camera moves automatically for trial operation.
Be careful not to catch your finger.
• On the PCS-XA80/XA55 system, check that the lens cover for the camera is
open. If it is closed, open it by sliding the lever for the lens cover at the top of the
camera to the right.

Calling a Remote Party by Using the Connect Menu

This method is available when the Connect button is displayed in the Home
menu.
Home
Camera
Connect
Connect button
1
Use the V, v, B or b button on the Remote Commander to select "Connect"
in the Home menu, then press the ENTER button.
The Connect menu appears.
/
1
/ (power) switch
AAA IP:XXX.XXX.XXX.XXX
Starting a Connection by Calling a Remote Party
POWER/STANDBY
Ready 5/11/2008 13:00
119