Sony PCS-XG80 Operating Instructions Manual page 214

• If you switch the broadcast mode from "Split" to "Voice Activate" in which the
picture of a specified terminal is displayed in full screen during communication, the
location of Pictures A to E will be changed when "Split" mode is restored.
• When there is one terminal, the picture is displayed in full screen regardless of the
setting.
• When the six-split window with a terminal specified is displayed, the picture from the
specified terminal is always displayed in the lower-right window.
• When "Split" mode is selected, you cannot control the camera on any connected
remote terminals.
Voice Activate mode
This mode allows you to detect the terminal with the loudest voice among the
connected terminals and to display the picture of that terminal in full screen on
all other terminals. The "
mode is activated. The indicator with an alphabetic letter (ex. :
the terminal of the displayed picture also appears. The
displayed on the monitor screen while the local picture is broadcast.
Note
To transmit pictures with resolution of 720p (1280 × 720 pixels) in H.264 Video Mode
when "Voice Activate" is activated, select "Voice Activate (720P)" in "Broadcast
Mode" of the Multipoint setup menu. However, the "Voice Activate (720P)" mode
cannot be selected when the communication is made via an ISDN or SIP connection.
Even for an IP connection, this mode is not available if the remote party does not
support H.264 Video Mode.
Fixed split mode
The pictures from the connected remote terminals and the picture of the local
terminal are displayed in split windows on the monitor screen as the same
manner as those in "Split" mode.
You can specify a picture among the split windows to fix it in the lower right
window for the six-split mode. Pictures other than the specified one are
displayed in the split windows in the connected sequence.
Broadcast select mode
You can specify a terminal to display the picture of that terminal in full screen
on all other terminals. The indicator with an alphabetic letter (ex.
214
Using the Display Control
" indicator appears when "Voice Activate"
Six-split window
The picture of the specified terminal is
always displayed in this window.
) indicating
indicator is
)