Sony PCS-XG80 Operating Instructions Manual page 84

The LAN page number after the LAN2 page
also varies according to the number of setting
items.
• The menu displays and references to
"LAN1" will be simply "LAN" on the
PCS-XG55/XG55S/XA55.
LAN
Basic Setup:
LAN1
Host Name
Enter your host name (up to 30 characters).
DHCP Mode
Allows you to select whether the Dynamic
Host Configuration Protocol (DHCP) server
is enabled.
Auto: The IP address, network mask,
gateway address and DNS address are
automatically assigned.
Off: Disables the DHCP server. In this case,
enter an IP address, network mask,
gateway address and DNS address.
Prefix Length
Configure the prefix length of the IPv6
address within the range of 0 to 128.
IP Address
Enter the IP address.
Network Mask
Enter the network mask.
Gateway Address
Enter the default gateway address.
Primary DNS
Enter a primary DNS address.
Secondary DNS
Enter a secondary DNS address.
LAN Mode
Allows you to select the interface type and
the communication mode of the LAN
connection.
Auto: The interface type and the
communication mode are detected
automatically.
100Mbps Full Duplex: Connects via
100BASE-TX in full duplex mode.
84
Registering Local Information
100Mbps Half Duplex: Connects via
100BASE-TX in half duplex mode.
10Mbps Full Duplex: Connects via
10BASE-T in full duplex mode.
10Mbps Half Duplex: Connects via
10BASE-T in half duplex mode.
LAN
Basic Setup:
LAN1: IPv6
Note
When "Internet Protocol" is set to "IPv4/
IPv6" in the Administrator setup menu, the
setup screen for IPv6 appears. In such cases,
configure the LAN mode in the IPv6 setup
screen.
DHCP Mode
Allows you to select whether the Dynamic
Host Configuration Protocol (DHCP) server
is enabled.
Auto: The IP address, network mask,
gateway address and DNS address are
automatically assigned.
Off: Disables the DHCP server. In this case,
enter an IP address, network mask,
gateway address and DNS address.
Prefix Length
Configure the prefix length of the IPv6
address within the range of 0 to 128.
IP Address
Enter the IP address.
Gateway Address
Enter the default gateway address.
Primary DNS
Enter a primary DNS address.
Secondary DNS
Enter a secondary DNS address.
LAN Mode
Allows you to select the interface type and
the communication mode of the LAN
connection.
Auto: The interface type and the
communication mode are detected
automatically.