Sony PCS-XG80 Operating Instructions Manual page 68

2
Use the V, v, B or b button to select "Setup", then press the ENTER button
on the Remote Commander.
The Setup menu appears on the monitor screen.
Menus available from a setup menu
The Setup menus are grouped into the following depending on the setting
items. The setup menus that include many setting items are divided into
multiple pages. Select an appropriate menu button to set the respective
item.
The commonly-used menu butttons are displayed on the screen at the
factory. Pressing the F4 button on the Remote Commander allows you to
display the maximum number of setup menu buttons. To restore the
commonly-used setup display, press the F4 button again.
Setup
Home
Back to Tools
For a description of each setup menu, see the page for that menu indicated
below.
Line Interface setup menu (see page 71)
Dial setup menu (see page 71)
Answer setup menu (see page 72)
Multipoint setup menu (see page 72)
Communication setup menu (see page 73)
Audio setup menu (see page 77)
Video setup menu (see page 80)
LAN setup menu (see page 83)
QoS setup menu (see page 87)
TOS setup menu (see page 88)
SIP setup menu (see page 89)
ISDN setup menu (see page 89)
Annotation setup menu (see page 91)
Camera setup menu (see page 91)
General setup menu (see page 91)
Home Menu setup menu (see page 94)
Administrator setup menu (see page 95)
Encryption setup menu (see page 101)
Shared Phone Book setup menu (see page 101)
68
Registering Local Information
Menu buttons
Line I/F
Line I/F
Line Interface
Dial
IP
Answer
Primary Line Interface
Multipoint
IP
Audio1
Use LAN2
Video2
LAN
LAN
LAN
SIP
I SD N S I P
I SD N S I P
Off