Sony PCS-XG80 Operating Instructions Manual page 98

Annotation
Enabled: Requires "Save Settings
Password" when saving the Annotation
setup settings.
Disabled: Does not require the password
when saving the Annotation setup
settings.
Camera
Enabled: Requires "Save Settings
Password" when saving the Camera
setup settings.
Disabled: Does not require the password
when saving the Camera setup settings.
Encryption
Enabled: Requires "Save Settings
Password" when saving the Encryption
setup settings.
Disabled: Does not require the password
when saving the Encryption setup
settings.
Shared Phone Book
Enabled: Requires "Save Settings
Password" when saving the Shared
Phone Book settings.
Disabled: Does not require the password
when saving the Shared Phone Book
settings.
Administrator5
Streaming/
Recording
Streaming
Select whether to enable the streaming
broadcast.
Enabled: Permits the streaming broadcast.
Disabled: Does not permit the streaming
broadcast of a videoconference.
Recording
Select whether to enable the recording of
video and audio to a "Memory Stick."
Enabled: Permits the recording.
Disabled: Does not permit the recording.
Video
Select a bit rate for streaming and recording
video.
Off: Disables the streaming and recording of
video.
98
Registering Local Information
64Kbps: Streams and records video at
64 Kbps.
128Kbps: Streams and records video at
128 Kbps.
384Kbps: Streams and records video at
384 Kbps.
512Kbps: Streams and records video at
512 Kbps.
Note
When "Off" is selected, only audio can be
streamed and recorded.
Multicast Address
Enter the multicast address for streaming
broadcasts.
Note
You can enter the unicast address in this menu.
If you set the unicast address, enter two or more
different numbers in "Audio Port Number" and
"Video Port Number" for streaming
broadcasts.
Audio Port Number
Enter the audio port number for streaming
broadcasts.
Video Port Number
Enter the video port number for streaming
broadcasts.
HOP
Enter a number from 0 to 255 as the HOP for
streaming broadcasts.
Administrator6
Access Permit
Web Monitor
Allows you to permit the monitoring
communication status through a Web
browser (automatic update of JPEG images).
On: Permits monitoring with a Web
browser.
Off: Does not permit monitoring with a Web
browser.
Web Access
Select whether to permit access to the
Communication System via a Web browser.
Enabled: Permits access via a Web browser.