Machine Information; Peripheral Status - Sony PCS-XG80 Operating Instructions Manual

Machine Information

The Machine Information menu shows the
versions of the HD Visual Communication
System and the connected equipment for
exclusive use, installed software versions,
etc.
Host Version
Displays the software version of the HD
Visual Communication System.
Software Option
Displays the optional software installed.
None: No software is installed.
Presentation: The PCSA-DSG80 HD Data
Solution software is installed.
Multipoint: The PCSA-MCG80 HD MCU
software is installed.
Option I/F
Displays the optional connected equipment.
None: No optional equipment is connected.
ISDN (B768): The PCSA-B768S ISDN
Unit is connected.
ISDN (B384): The PCSA-B384S ISDN
Unit is connected.
Tablet: Pen tablet (Bamboo small CTH-470/
K0 manufactured by Wacom Co., Ltd.) is
connected.
Host Name
Displays the host name.
IP Address
Displays the IP address for LAN1 (LAN on
the PCS-XG55/XG55S).
Note
When "Internet Protocol" is set to "IPv4/
IPv6" in the Administrator setup menu, both
IPv4 and IPv6 IP addresses are displayed.
IP Address (LAN2) (PCS-XG80/
XG80S/XA80 only)
Displays the IP address for LAN2.
MAC Address
Displays the MAC address for LAN1 (LAN
on the PCS-XG55/XG55S/XA55).
104
Displaying the Machine Status
MAC Address (LAN2) (PCS-XG80/
XG80S/XA80 only)
Displays the MAC address for LAN2.
Serial Number
Displays the serial number.
Machine version
Selecting "Next" in the Machine
Information menu shows the codec version,
etc.

Peripheral Status

Video Input
Displays the input video name.
Audio Input (MIC)
Displays microphone input name.
Audio Input (AUX)
Displays the external audio input name.
Video Output
Displays the On/Off setting of "1080 Mode"
and the 50 Hz/60 Hz setting of "Frequency".
Audio Output
Displays the audio output equipped with this
system.
LAN Mode (LAN1)
Displays the LAN Mode for LAN1 (LAN on
the PCS-XG55/XG55S/XA55).
LAN Mode (LAN2) (PCS-XG80/XG80S/
XA80 only)
Displays the LAN Mode for LAN2.
Gatekeeper
Displays the status of registration to
gatekeeper with the following messages:
Gatekeeper Requested, Gatekeeper
Confirmed, Gatekeeper Reject, Registration
Requested, Registration Confirmed,
Registration Failed, Registration Rejected,
Registration Timeout, Unregistration
Requested and Unregistration Confirmed.
First Camera
Displays the name of the first camera.