Calling A Remote Party By Entering An Isdn Telephone Number Or Ip Address In The Launcher Menu - Sony PCS-TL50 Operating Instructions Manual

Calling a Remote Party by Entering an ISDN Telephone Number or
IP Address in the Launcher Menu
1
Select the line interface from the drop-down list at the bottom of the
launcher menu.
Press the V, v, B or b button to select the line interface button at the bottom of
the launcher menu, then press the ENTER button to display the drop-down list.
Select the line interface by pressing the V or v button, then press the ENTER
button.
IP:012.345.678.912
ISDN:012345678912
1
Bob
ISDN
Line interface
IP: Connects to the videoconferencing system of a remote party via a LAN.
Telephone: Connects to the ISDN telephone of a remote party to conduct a
voice meeting via the ISDN connection.
ISDN: Connects to the videoconferencing system of a remote party via an
ISDN.
SIP: Connects to an IP phone using SIP.
2
Enter the IP address (for IP) or the ISDN telephone number (for ISDN or
Telephone) of the remote party in the text box.
Press the V, v, B or b button on the Remote Commander to select the text box,
then press the ENTER button. Enter numerals using the number buttons on the
Remote Commander.
Notes
• You can enter a dot (.) with the
Commander.
• To correct the entered number, press the PinP (BACK SPACE) button on
the Remote Commander. The last entered number is deleted.
• To delete the entered IP address, press the PandP (CLEAR) button on the
Remote Commander.
• Do not enter the prefix number in the telephone number text box.
3
Press the
then press the ENTER button. Or press the CONNECT/DISCONNECT
( /
2 3 4
OSAKA NEW YORK
John
Text box
V, v, B or b button on the Remote Commander to select "Dial",
) button on the Remote Commander.
Starting a Conference by Calling a Remote Party
Detailed Dial
Phone Book
5 6
Dial
Dial
button on the Remote
b or
77