Sony PCS-XG80 Operating Instructions Manual page 93

Clock Display Pattern
Allows you to select the display pattern of
the clock.
You can select from among "Year/Month/
Day", "Month/Day/Year", "Day/Month/
Year", "Year-Month-Day" and
"Day.Month.Year".
Date
Enter the current date (year/month/day).
Time
Set the current clock.
Time Update
Selecting "Execute" and pressing the
ENTER button on the Remote Commander
updates the clock setting when "NTP" is set
to "On".
General3
Menu Screens
Allows you to select whether to display the
items of the Tools and Setup menus.
Display Time in Communication
Off: Displays neither the elapsed nor current
time during communication.
Time Display: Displays the elapsed time
during communication.
Current Time: Displays the current time
during communication.
Display Terminal Name
Off: Does not display the connected
terminal names.
Always show: Always displays the
connected terminal names.
Show temporarily: Displays the connected
terminal names for a brief moment.
Guide
On: Displays the instruction that guides the
operation.
Off: Does not display the instructions.
Display Indicator
On: Displays the indicators such as
"Memory Stick" and tablet.
Off: Does not display the indicators.
Communication Mode Display
On: Displays the communication mode
when the system is connected to the
remote site.
Off: Does not display the communication
mode when the system is connected to
the remote site.
Display On-Screen Keyboard
On: Displays the on-screen keyboard.
Off: Does not display the on-screen
keyboard.
For details on the on-screen keyboard, see
"Entering Characters Using the On-Screen
Keyboard" on page 65.
Menu Transparency
Allows you to select the degree of
transparency of the superimposed menu
display over the background picture. You
can select from among "High", "Medium"
and "Low".
General4
Function Keys in
Communication
Allows you to switch the picture with one
press of a button on the Remote
Commander.
You can set the function to be assigned to
each of the F1 to F4 (function) buttons.
Notes
• You cannot set "Function Keys in
Communication" during communication. Set
this item before starting communication.
• The "S-VIDEO" setting is not available on
the PCS-XG55/XG55S/XA55.
F1
Allows you to select the video input
switched by pressing the F1 button on the
Remote Commander. You can select from
among "Far/Near", "Camera", "S-VIDEO",
"RGB", "YPbPr" and "No Operation".
This item is preset to "Far/Near" at the
factory. This setting allows you to switch the
cameras to be controlled between the local
and remote sites during communication by
pressing the F1 button on the Remote
Commander.
Registering Local Information
93