Calling a Remote Party by Entering an ISDN Telephone Number or
IP Address in the Launcher Menu
Select the line interface from the drop-down list at the bottom of the
Press the V, v, B or b button to select the line interface button at the bottom of
the launcher menu, then press the ENTER button to display the drop-down list.
Select the line interface by pressing the V or v button, then press the ENTER
IP: Connects to the videoconferencing system of a remote party via a LAN.
Telephone: Connects to the ISDN telephone of a remote party to conduct a
voice meeting via the ISDN connection.
ISDN: Connects to the videoconferencing system of a remote party via an
SIP: Connects to an IP phone using SIP.
Enter the IP address (for IP) or the ISDN telephone number (for ISDN or
Telephone) of the remote party in the text box.
Press the V, v, B or b button on the Remote Commander to select the text box,
then press the ENTER button. Enter numerals using the number buttons on the
• You can enter a dot (.) with the
• To correct the entered number, press the PinP (BACK SPACE) button on
the Remote Commander. The last entered number is deleted.
• To delete the entered IP address, press the PandP (CLEAR) button on the
• Do not enter the prefix number in the telephone number text box.
then press the ENTER button. Or press the CONNECT/DISCONNECT
V, v, B or b
button on the Remote Commander to select "Dial",
) button on the Remote Commander.
Starting a Conference by Calling a Remote Party
button on the Remote