Answer Setup Menu; Multipoint Setup Menu (Pcs-Xg80/Xg80S/Xa80 Only) - Sony PCS-XG80 Operating Instructions Manual

Note
Enter "9" when this is required to make an
outgoing call.
Select LAN Prefix
Allows you to select whether to use the LAN
prefix when dialing via a LAN.
Disable: Disables the LAN prefix.
Enable: Enables the LAN prefix.
LAN Prefix
When dialing using the IP connection, the
information entered into this box is added to
the beginning of the IP address. Select
whether to use the LAN prefix in "Select
LAN Prefix".

Answer Setup Menu

The Answer setup menu is used to set up call
reception.
Answer
Answer
Auto Answer
Allows you to select whether the system
answers calls automatically.
On: Answers calls automatically. When a
call comes in, the line is automatically
connected.
Off: Allows you to answer calls manually.
When a call comes in, the phone rings. If
you select "OK" in the "Answer?"
message, the line is connected.
ISDN MSN
Allows you to select whether you are using
the Multiple Subscriber Number.
Off: Select when you do not use the
Multiple Subscriber Number.
On: Select when you use the Multiple
Subscriber Number.
Mic on Answer
Allows you to select whether to transmit
audio from your site when you receive a call
and connect it.
On: Enables transmission of audio when
answering a call.
Off: Disables transmission of audio when
answering a call.
72
Registering Local Information
Reject Answer (PCS-XG80/XG80S/
XA80 only)
Allows you to select whether to connect a
remote party's calling during
communication.
On: Disables the connection of a remote
party.
Off: Enables the connection of a remote
party.
For details, see "Turning Off the Sound
Momentarily – Muting Function" on page
143.
Multipoint Setup Menu
(PCS-XG80/XG80S/XA80
only)
The Multipoint setup menu is used to set up
multipoint connection
system is used as the main terminal
The menu is displayed only when the PCSA-
MCG80 HD MCU software is installed in
the Communication System.
For the procedure how to install the PCSA-
MCG80 software, see page 203.
Note
When the local system is used as the main
terminal and connected with remote terminals
other than the PCS-XG80/XG80S/XG55/
XG55S/XA80/XA55/XL55, the maximum
bandwidth to be used is restricted to 4 Mbps.
Multipoint
Multipoint
Multipoint Mode
AUTO: Switches from point-to-point
connection to multipoint connection
automatically.
On: Enables you to make a multipoint
connection at any time.
Broadcast Mode
Allows you to select the broadcast mode.
Split: Displays the picture from the
connected terminals in split windows.
Voice Activate: Detects the terminal where
a speaker has the loudest voice, and
when the local
.