Entering Characters Using The On-Screen Keyboard - Sony PCS-XG80 Operating Instructions Manual

Note
When "Internet Protocol" is set to "IPv6" or "IPv4/IPv6" in the Administrator setup
menu, you can enter colons (:).
When "IPv4/IPv6" is specified, only colons can be entered with the b button. When "IPv4/
IPv6" is specified and you are calling using IPv4, press the DOT button twice to enter a dot.
To delete a character
Press the BACK SPACE button. The last entered character is deleted.
To delete all the characters entered
Press the F3 button.

Entering Characters Using the On-Screen Keyboard

This section explains how to enter the letters or numbers in the text box in the
menu using the on-screen keyboard displayed on the monitor screen.
When "Display On-Screen Keyboard" is set to "On" in the Menu Screens page
of the General setup menu (page 93), the on-screen keyboard automatically
appears on the screen if character input is required in the menu.
Note
You can also use the buttons on the Remote Commander even when the on-screen
keyboard is displayed on the screen.
To enter letters or numbers
1
Use the V, v, B or b button on the Remote Commander to select "Num"
or "Alpha" on the on-screen keyboard, then press the ENTER button.
Select "Num" to enter numbers, and "Alpha" to enter alphabetic letters.
2
Use the V, v, B or b button on the Remote Commander to select the button
on the on-screen keyboard on which the desired character is indicated, then
press the ENTER button.
When you select a number, the selected number is entered.
When you select an alphabetic letter, a submenu with available letters
appears on the on-screen keyboard. Select the desired letter and press the
ENTER button on the Remote Commander. The selected letter is entered.
Num 1 ABC
GHI JKL
Alpha
PQRS TUV
0
Space
End
DEF
Back
Space
MNO
WXYZ Symbol
Dot
Cancel
Using the Menus
65