Table of Contents
Advertisement
?
?
1
/
(power) indicator
The indicator on the System starts flashing, then lights in green when the
power is on.
The Home menu appears on the monitor screen and the picture shot by the
local camera also appears.
Note
After the power is turned on, the camera moves automatically for trial operation. Be
careful not to catch your finger.
Calling a Remote Party by Using the Connect Menu
This method is available when the Connect button is displayed in the Home
menu.
Home
Camera
Connect
Connect button
1
Use the V, v, B or b button on the Remote Commander to select "Connect"
in the Home menu, then press the ENTER button.
The Connect menu appears.
/
1
/
(power) switch
AAA
IP:XXX.XXX.XXX.XXX
Starting a Connection by Calling a Remote Party
Ready
5/11/2008 13:00
101
Advertisement
Table of Contents
