About The Network Routing Check - Sony PCS-XG80 Operating Instructions Manual

About the Network Routing Check

Before connecting a remote system, you can check the network routing to
assure smooth connection with the system.
For the network routing check, knowledge of network is required. Consult your
network administrator or Sony dealer.
If you have any questions about the checked result, consult your network
administrator or Sony dealer.
To start the network routing check
Open the Network Routing Check menu of the Machine Status menu on the
local system that performs the routing check, then set the necessary items on
the menu.
Select "Start Measurement" to start the network routing check.
Machine Status > Network Routing Check
For the procedure how to open the Network Routing Check menu, see
"Displaying the Machine Status" on page 102.
Note
While the network routing check is being performed, you cannot use any other functions
including communication. When the routing check is complete, the checked results are
displayed on the Network Routing Check menu.
IP Address of Remote Site
Line I/F
Gateway Result
ping Result
Packet Loss (%)
RTT
Network Routing Check
H.323 Communication
traceroute HOP
Total RTT
Start Measurement
XXX.XXX.XXX.XXX
LAN1
End
About the Network Routing Check
117