Honeywell HRHM1041 User Manual page 39

Configuring PTZ Functions
You can configure presets, tours, patterns, and borders using the PTZ control panel.
Configuring PTZ Presets
You can program preset positions for the PTZ camera. For example, you can point the camera
at a specific location, such as a doorway, when an alarm event occurs.
To program a preset
1.
2.
3.
•
•
On the expanded PTZ control panel, click the Preset button.
Use the direction arrows to point the camera where you want to set as the preset, and then
click Set.
In the Preset box, enter a number for the preset, and then click Set to save your settings.
To program additional presets, repeat steps 1 through 3.
To delete a preset, enter the number of the preset that you want to delete in the Preset
box, and then click Del Preset.
Note Some protocols do not support the Del Preset function.
Viewing Live Video | 39
800-19403 - A - 12/2014