Configuring Multicast Settings - Honeywell HRHM1041 User Manual

Configuring Multicast Settings

Multicast allows for simultaneous real-time monitoring of live video from the DVR at multiple
remote locations over the network.
To configure multicast settings
1.
2.
3.
4.
5.
6.
Go to Main Menu > Setting > Network > Multicast.
On the Multicast page, select the Enable check box to enable multicast.
In the IP Address box, enter a multicast IP address. The address must be valid for
multicasting and should be in the range 224.0.0.0 to 239.255.255.255 for IPv4 or have the
prefix ff00::/8. An address in the range 239.252.0.0 to 239.255.255.255 is recommended.
In the Port box, enter a multicast port number or use the default setting (36666).
Click Apply to save your settings.
If you want to exit the Setting menu, click OK.
Configuring Network Settings | 79
800-19403 - A - 12/2014