Configuring Alarm Outputs - Honeywell HRHM1041 User Manual

Configuring Alarm Outputs

To configure alarm outputs
1.
2.
3.
4.
Go to Main Menu > Setting > Event > Alarm Output.
On the Alarm Output page, set the alarm type for each alarm output:
• Schedule Select the alarm output(s) that you want to apply the recording
schedule settings to. For more details, see
Recording Schedule
Recording Schedule
• Manual Select the alarm output(s) that you want to enable for all channels.
• Stop Select the alarm output(s) that you want to disable for all channels.
To turn off triggered alarm outputs, next to Alarm Release, click OK.
Click Apply to save your changes, and then click OK.
Configuring Event Settings | 95
Configuring the Video
on page 48 and Configuring the Snapshot
on page 49.
800-19403 - A - 12/2014