Honeywell HRHM1041 User Manual page 108

108 | Performance Series HQA Digital Video Recorder User Guide
To configure the Daylight Saving Time (DST) setting
1.
2.
3.
4.
To synchronize the system time with the Network Time Protocol (NTP)
1.
2.
3.
4.
5.
6.
7.
8.
www.honeywell.com/security
Go to Main Menu > Setting > System > General > Date&Time.
On the Date&Time tab, select the DST check box.
Specify when Daylight Saving Time begins and ends.
a. Since the specific dates change every year, select Day of Week as the DST Type.
b. Set the Start Time as Mar 2nd Su 02:00 (the second Sunday in March at 2:00 a.m.).
c. Set the End Time as Nov 1st Su 02:00 (the first Sunday in November at 2:00 a.m.).
Click Apply to save your settings.
Ensure that the DVR is connected to the Internet.
Go to Main Menu > Setting > System > General > Date&Time.
On the Date&Time tab, select the NTP check box.
In the Server IP box, enter the IP address of the NTP server that you want to use (for
example, time.nist.gov).
Ensure that Port is set to 123.
To change the frequency with which the system time synchronizes with the NTP server,
enter a new time in the Update Period box. The default setting is 60 min.
Click Manual Update to manually synchronize your system time with the NTP server.
Click Apply to save your settings.