Safety Instructions - Honeywell HRHM1041 User Manual

Safety Instructions

Before operating or installing the unit, read and follow all instructions.
After installation, retain the safety and operating instructions for future
reference
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. SERVICING - Do not attempt to service this unit yourself as opening or removing covers
11. REPLACEMENT PARTS - When replacement parts are required, be sure the service
HEED WARNINGS - Adhere to all warnings on the unit and in the operating instructions.
INSTALLATION
• Install in accordance with the manufacturer's instructions.
• Installation and servicing should be performed only by qualified and experienced
technicians to conform to all local codes and to maintain your warranty.
• Do not install the unit in an extremely hot or humid location, or in a place subject to
dust or mechanical vibration. The unit is not designed to be waterproof. Exposure to
rain or water may damage the unit.
• Any wall or ceiling mounting of the product should follow the manufacturer's
instructions and use a mounting kit approved or recommended by the manufacturer.
POWER SOURCES - This product should be operated only from the type of power source
indicated on the marking label. If you are not sure of the type of power supplied to your
facility, consult your product dealer or local power company.
HEAT - Situate away from items that produce heat or are heat sources such as radiators,
heat registers, stoves, or other products (including amplifiers).
WATER AND MOISTURE - Do not use this unit near water or in an unprotected outdoor
installation, or any area classified as a wet location.
MOUNTING SYSTEM - Use only with a mounting system recommended by the
manufacturer, or sold with the product.
ATTACHMENTS - Do not use attachments not recommended by the product
manufacturer as they may result in the risk of fire, electric shock, or injury to persons.
ACCESSORIES - Only use accessories specified by the manufacturer.
CLEANING - Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
may expose you to dangerous voltage or other hazards. Refer all servicing to qualified
service personnel.
technician has used replacement parts specified by the manufacturer or have the same
characteristics as the original part. Unauthorized substitutions may result in fire, electric
shock or other hazards.
| 5
800-19403 - A - 12/2014