Manual Record Settings - Honeywell HRHM1041 User Manual

46 | Performance Series HQA Digital Video Recorder User Guide

Manual Record Settings

In live view mode, you can manually record a clip directly to a connected USB storage device.
To record a video clip in live view mode
1.
2.
3.
4.
5.
www.honeywell.com/security
Connect a USB storage device (such as a USB flash drive) to one of the USB ports on the
DVR.
The Find USB device dialog box opens automatically. Right-click to close the window.
In live view mode, move the mouse pointer to the top of the channel window to display the
camera toolbar (see Camera Toolbar
On the camera toolbar, click the Realtime Backup button
button changes to green while the DVR is recording.
Click the Realtime Backup button again to stop recording.
The video clip is saved automatically to the connected USB storage device. The file name
uses the following format: [DVR name]_[channel]_[video stream]_[recording start
time]_[recording end time]).dav.
on page 32).
to start recording. The