Honeywell HRHM1041 User Manual page 71

To configure 3G wireless connections
1. Go to Main Menu > Setting > Network > 3G Setting.
2. On the 3G Setting page, you can configure the following settings:
• Network Device
Name
• Enable
• Network Type
• APN
• AUTH
• Dial Number
• User Name
• User Password
• Pulse Interval
• Dial
3. Click Apply to save your settings.
4. If you want to exit the Setting menu, click OK.
Select the wireless network adapter name.
Select or clear the check box to enable or disable 3G wireless
connection using the selected wireless network adapter.
Select the network type that meets your requirements.
Select the wireless connection server that you want to use to
access the wireless network.
Select the authentication mode that you want to use to access
the wireless network: PAP or CHAP.
Enter the 3G network dial-up number that you received from your
Internet service provider.
Enter a user name for logging on to the 3G network.
Enter a password for logging on to the 3G network.
Enter the time, in seconds, of the 3G connection when the extra
stream is disabled. For example, if you enter 5 seconds, the 3G
connection lasts for 5 seconds and then the device automatically
disconnects. If there is no extra stream, there is no restriction on
the connection time.
Click Dial to manually enable or disable the 3G network
connection.
Configuring Network Settings | 71
800-19403 - A - 12/2014