Honeywell HRHM1041 User Manual page 50

50 | Performance Series HQA Digital Video Recorder User Guide
To configure snapshot recording settings
1.
2.
3.
4.
www.honeywell.com/security
Go to Main Menu > Setting > Camera > Encode > Snapshot.
On the Snapshot tab, configure the following settings:
• Snap Number
• Channel
• Mode
• Image Size
• Image Quality
• Snapshot Frequency
Click Apply to save your settings.
To copy the settings to additional channels, click Copy, select the channels that you want
to copy the settings to, and then click OK.
Note The DVR assigns event-activated snapshots a higher priority than
schedule-activated snapshots. If you have enabled both of these types of
snapshots, then the system activates an activation snapshot when an alarm
occurs. If there is no alarm, then the DVR takes snapshots according to the
schedule setup.
Select the number of snapshots to take at a time.
Select the channel that you want to configure the settings for.
Select Timing to take snapshots according to a schedule.
Select Trigger to take snapshots when a motion detection, video
loss, video tampering, or alarm event occurs.
Select a file size (D1, HD1, 2CIF, CIF).
Select a value between 1 and 6, with 6 being the highest quality.
Select a value between 1 SPL (second per picture) and 7 SPL or
click Customized to enter your own setting.