Honeywell HRHM1041 User Manual page 69

To configure port settings
1. Go to Main Menu > Setting > Network > Connection.
2. On the Connection page, you can configure the following settings:
• Max Connection
• TCP Port
• UDP Port
• HTTP Port
• HTTPS Port
• RTSP Port
3. Click Apply to save your settings.
4. If you want to exit the Setting menu, click Save.
Note You must restart the DVR to apply any changes to the DVR's port settings.
Ensure that the port settings do not conflict with each other.
Select a value between 0 and 20. The default setting is 20.
Select a value between 1025 and 65535. The default setting is
37777.
Select a value between 1025 and 65535. The default setting is
37778.
Select a value between 0 and 65535. The default setting is 80.
Select a value between 0 and 65535. The default setting is 443.
Select a value between 0 and 65535. The default setting is 554.
Configuring Network Settings | 69
800-19403 - A - 12/2014