IBM System x3200 Problem Determination And Service Manual page 43

Hide thumbs Also See for System x3200:
Table of Contents

Advertisement

v Follow the suggested actions in the order in which they are listed in the Action column until the problem
is solved.
v See Chapter 3, "Parts listing, System x3200 Types 4362 and 4363," on page 67 to determine which
components are customer replaceable units (CRU) and which components are field replaceable units
(FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Error code
Description
5962
IDE DVD drive configuration error.
8603
Pointing-device error.
00012000
Processor machine check error.
00019701
Microprocessor 1 failed the built in self-test
(BIST).
01298001
No update data for microprocessor 1.
Action
1. Run the Configuration/Setup Utility program and
load the default settings (see "Using the
Configuration/Setup Utility program" on page
130).
2. Reseat the following components:
a. DVD drive cable
b. DVD drive
c. System board
3. Replace the components listed in step 2 one at a
time, in the order shown, restarting the server
each time.
1. Reseat the pointing device.
2. Replace the following components one at a time,
in the order shown, restarting the server each
time:
a. Pointing device
b. (Trained service technician only) System
board
1. (Trained service technician only) Reseat the
microprocessor.
2. Replace the following components one at a time,
in the order shown, restarting the server each
time:
a. (Trained service technician only)
Microprocessor
b. (Trained service technician only) System
board
1. (Trained service technician only) Reseat the
microprocessor.
2. Replace the following components one at a time,
in the order shown, restarting the server each
time:
a. (Trained service technician only)
Microprocessor
b. (Trained service technician only) System
board
1. Update the BIOS code again (see "Updating the
firmware" on page 129).
2. (Trained service technician only) Reseat the
microprocessor.
3. (Trained service technician only) Replace the
microprocessor.
25
Chapter 2. Diagnostics

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents