Fantic Caballero 125 series Owner's Manual page 89

The lamp bracket complete with headlamp re-
mains connected to the electric cables. DO NOT
TUG ON THE ELECTRIC CABLES.
To work more comfortably the headlamp
may be detached by loosening the two side
screws.
- Shift the complete lamp bracket to the side.
NOTE: handle the plastic parts with care; do not
scratch or damage them.
POSITION LIGHT BULB
Do not tug on the electric cables to take out the
lamp-holder.
- Grasp the lamp-holder and pull it out of its seat.
- Take out the position light bulb (1) and re-
place it with one of the same type.
DIPPED/FULL BEAM BULB
- Do not tug on the electric cables to remove
the bulb electric connector.
- Remove the black rubber sleeve from the
central lamp-holder.
- Release the lamp-holder retaining spring (3)
and remove it.
- Draw out the lamp-holder (2) from the pa-
rabola seat.
- Press the bulb gently and turn it counter-
clockwise.
- Take out the bulb from its seat.
Once the bulb has been changed, just proceed
with the disassembly stages in the reverse order
in order to remount the optical unit.
89