Instrument Panel - Fantic Caballero 125 series Owner's Manual

DASHBOARD
FUNCTIONAL CHARACTERISTICS
Pos. Description
1 High beam indicator light
2 Turn signal indicator light
3 Display
4 Odometer trip control/MODE button
5 Neutral
2
3
1
mph km/h
TOTAL TD LAP MAX
H
L
5
BUTTON
The purpose of the button is to:
• Let you scroll the various functions.
• Reset the value of the partial distance, stop-
watch and maximum speed.
• Access the setup menu to set the clock, change
the unit of measure.
Scrolling of functions (i.e. changing from one func-
tion to the next) is always possible, regardless of
whether the vehicle is moving or not. Briefly press
(tmin = 1sec.) the button and, when you release it,
the display will be updated with the new function.
The partial distance, stopwatch and maximum
speed can be reset with the vehicle either mov-
ing or at a standstill, as described in the previous
paragraphs.
The setup menu can be accessed only when the
vehicle is stopped. This is managed as described in
the chapter SETUP MENU.
The button is always active in vehicles without a
vehicle battery. It works when the key selector is
turned for models equipped with a vehicle battery.
SEQUENCE OF FUNCTIONS SHOWN
It is always possible to scroll the functions,
4
whether the vehicle is moving or not. To do so,
use the button in the sequence set forth in the
following table:
Brief press:
TOTAL  TD  LAP  MAX

SET CLOCK
SET UNIT OF MEASURE
TOTAL  distance travelled
TD  partial distance travelled
LAP
 lap time
MAX  maximum speed
CURRENT SPEED FUNCTION
The information is always displayed on digits
10÷12 (fig. A) If the selected unit of measure
is km/h (default value), the corresponding digit
is shown. Use the button and access the setup
menu to change the unit of measure to mph.
km/h
TOTAL
H
L
mph
TOTAL
H
L
Indication of speed in km/h and mph (fig. A Indication of speed in km/h and mph (fig.
The displayed value is updated every 0.5 sec-
onds.
TOTALIZER FUNCTION (TOTAL)
The information is shown on digits 1÷5 accompa-
nied by the message TOTAL, as shown in fig. B
km/h
TOTAL
H
L
mph
TOTAL
H
L
Total distance travelled (fig. B)
A)
61