Installing The Scanner Mount - Motorola VC70N0 Product Reference Manual

Installing the Scanner Mount

The Scanner mount kit contains the following items:
•
Side accessory mount (PN KT-ACCMNT-VC70-R) with two screws, two captive lock washers and flat
washers
•
Scanner mount (PN KT-SCANMNT-VC70-R) with four screws, four captive lock washers and flat washers
NOTE For scanner mounts information, refer to
Attach the scanner mount to the side accessory mount, using four M4x10mm screws with captive flat and lock
1.
washers. Torque the screws to 8 + 10% kgf-cm (7 + 10% lbs-in).
Attach the side accessory mount to the VC70, using two M5x14mm screws with captive flat and lock
2.
washers.Tork the screws to 20 + 10% kgf-cm (17 + 10% lbs-in).
Side Accessory
Mount
Screws
Scanner Mount
Installing the Scanner Bracket
Figure 2-27
Accessories on page
Screws
Installation 2 - 25
1-4.