Comm Led - Motorola VC70N0 Product Reference Manual

Charging LED Indications
Table 3-2
LED State
Solid Green
Blinking Green
Slow Blinking Green
Solid Red

COMM LED

The COMM LED blinks to indicate WLAN radio activity.
COMM LED is enabled. To disable the COMM LED:
NOTE These settings are not persistent across a cold boot.
Tap
1. My Device icon
External Devices Tab Window
Figure 3-2
Tap the
2. Enable Comm Led
Tap .
3. OK
COMM LED Indications
Table 3-3
LED State
Solid Green
Slow Blinking Green (once every 2
seconds)
Off
Backup battery is fully charged (both external power and backup
battery available).
Backup battery charging in progress (both external power and
backup battery available).
Backup battery is low (both external power and backup battery
available).
Backup battery not available (external power only available).
> icon >
Control Panel System Manager
check box.
Excellent, very good or good RSSI signal strength.
Poor RSSI signal strength.
WLAN is OFF or not connected – no RSSI signal.
Indication
Table 3-3 lists the states of the COMM LED. By default, the
icon. The
System Manager
Indication
Operating the VC70 3 - 5
window displays.