Setting Up An Windows Mobile Device Center Connection On The Host Computer (Windows 7) - Motorola VC70N0 Product Reference Manual

8 - 6 VC70 Vehicle Computer Product Reference Guide
ActiveSync Connected Window
Figure 8-8
During the first synchronization, information stored on the vehicle computer is copied to the host computer. When
the copy is complete and all data is synchronized, the vehicle computer can be disconnect from the host computer.
NOTE The first ActiveSync operation must be performed with a local, direct connection. To retain partnerships after a
cold boot, capture partnership registry information in a .reg file and save it in the Flash File System, detailed
information is provided in the EMDK Help File.
For more information about using ActiveSync, start ActiveSync on the host computer, then see ActiveSync Help.
Setting Up an Windows Mobile Device Center Connection on the Host Computer
(Windows 7)
To set up a Sync connection using Windows 7:
Select Start > All Programs > Windows Mobile Device Center on the host computer.
1.
Windows Mobile Device Center (WMDC)Window
Figure 8-9