Chapter 3 Operating The Vc70; Introduction; Control Panel Applications - Motorola VC70N0 Product Reference Manual

Chapter 3 Operating the VC70

Introduction

This chapter explains the buttons, status icons and controls on the VC70 and provides basic instructions for using
the VC70, including powering on and resetting. It also included instructions for entering and capturing data.

Control Panel Applications

NOTE Some of the scanner parameters accessible through the Control Panel may not be relevant to all scanners
used with the VC70.
For a complete list of scanner setting configured by using API, refer to EMDK documentation. Alternatively,
use the configuration bar codes provided with each scanner documentation.
Table 3-1 lists the available applications on the VC70 Control Panel.
From the VC70 desktop, tap
List of Control Panel Applications
Table 3-1
Icon
Backlight - Set the display backlight
time-out and adjust brightness. Refer to the
Microsoft Applications for Embedded
Version 7.00 User Guide for more
information. Refer to
Brightness on page
DataWedge - Enable data capture using a
connected Scanner. DataWedge Scanner
Connection on page 4-1
Dialing - Set dialing properties.
> Settings > Control Panel
Description
Adjusting the
3-12.
.
Icon
Certificates - See information about
certificates installed on the VC70.
Date/Time - Set the VC70 clock to the
date, time and time zone of your
location.
Display - Set the background and
appearance of the VC70 desktop.
Description