Checking Backup Battery Status
The VC70 is equipped with an internal Lithium Ion backup battery used in case the of the forklift battery fails or
needs to be replaced.
Disconnecting the Backup Battery
Before the VC70 is shipped out of the factory, the backup battery is electrically disconnected from the VC70
internal circuitry. Upon first time connection of power to the VC70, the battery automatically connects.
It is recommended to perform electronic disconnection of the backup battery before the VC70 is shipped, stored or
not used for a long period.
To disconnect the backup battery electrically:
When the VC70 is connected to external power, disconnect and remove the power cable.
1.
Perform Cold Boot (see Performing a Cold Boot on page 3-19).
2.
Checking the Status of the Backup Battery
To check the status of the backup battery, tap
window.
Power settings Window
Figure 3-34
The tabs of the Power Settings window provides the following options and indications:
•
Battery:
•
Advanced:
•
BatteryMgmt:
•
RunTime:
•
USBCharging:
>
>
Settings
Control Panel
Operating the VC70 3 - 29
>
to display the
Power Settings