Motorola VC70N0 Product Reference Manual page 125

TelnetCE Client shows the following notification: "
12.
". Tap
Host Profile? Yes
Enter the following Host Profile information:
13.
•
Indicates the name of the host profile. Usually, this is the name or alias of the host system with which
Alias:
the VC70 creates a Telnet session.
•
Indicates the type of emulation that the host system uses. Available Options: <IBM-5251-11>
Emulation:
<IBM-3278-2> <IBM-3279-2> <IBM-3279-2E> <VT100> <VT220> <HP>. Default: <IBM-5251-11>.
•
Indicates the IP address or host name of the host system. Possible Values: Valid IP address of the
Address:
running terminal emulation or host name.
•
Indicates the TCP port on which the host system is listening for Telnet connections. Possible Values: 0 -
Port:
65535. Default: 23 for Telnet server.
•
Secure Shell (SSH) is a cryptographic network protocol for secure data communication. Check the
box if required.
encryption
Tap .
14. Save
NOTE If re-editing is required, tap Options > Configure > Host Profiles and enter default password: "system".
tap OK to continue.
Tap
15. Options > Connect Session 1
connected to the host system. The bar code data will show on the black screen.
No Host Profiles have been configured. Would you like to add a
to continue.
On the Edit Host Profile box, verify the Alias name and tap
and scan a bar code to scan a bar code to verify that the scanner is properly
TelnetCE Configuration
Use SSH
.
Done
5 - 9