Connect Ds3508-Er Scanner To Usb Port Of The Vc70 (Hid) - Motorola VC70N0 Product Reference Manual

Connect DS3508-ER Scanner to USB Port of the VC70 (HID)

To connect DS3508-ER scanner to the VC70:
NOTE Refer to the scanner Product Reference Guide for information on configuring the scanner.
Connect the USB scanner cable (PN 25-159548-01) to the scanner.
1.
Connect the USB scanner cable to USB 1 or USB 2 connector of the VC70.
2.
USB Cable
Connecting DS3508-ER Serial Scanner to a USB Port
Figure 5-47
Open Microsoft WordPad and scan the following barcode. Verify a correct reading.
3.
From the VC70 Desktop, Tap
4.
TelnetCE Client launches on the VC70 and displays the Scanner Selection notification. Tap
5.
with "
No host connection
On the black screen, tap
6.
TelnetCE Client shows the following notification: "
7.
". Tap
Host Profile? Yes
Enter the following Host Profile information:
8.
•
Indicates the name of the host profile. Usually, this is the name or alias of the host system with which
Alias:
the VC70 creates a Telnet session.
•
Indicates the type of emulation that the host system uses. Available Options: <IBM-5251-11>
Emulation:
<IBM-3278-2> <IBM-3279-2> <IBM-3279-2E> <VT100> <VT220> <HP>. Default: <IBM-5251-11>
•
Indicates the IP address or host name of the host system. Possible Values: Valid IP address of the
Address:
running terminal emulation or host name.
•
Indicates the TCP port on which the host system is listening for Telnet connections. Possible Values: 0 -
Port:
65535. Default: 23 for Telnet server.
USB Connector
> Programs > TelnetCE
" indication shows.
Options > Connect Session 1
No Host Profiles have been configured. Would you like to add a
to continue.
TelnetCE Configuration 5 - 35
Cable PN: 25-159548-01.
Coiled, 12 feet.
to start TelnetCE.
.
; a black screen
No