Controlling The External Keyboards Backlight; Adjusting The Volume - Motorola VC70N0 Product Reference Manual

mode (or after five seconds of inactivity the VC70 automatically returns to normal operation). A light sensor sets the
screen brightness in accordance to ambient light.
NOTE When using cordless scanner, the default inactivity time-out-timer set for Never should not be overridden.
If overridden, a user, standing away from the unit, may not notice that the unit has switched to unattended
mode after the time-out-timer had expired.

Controlling the External Keyboards Backlight

To adjust the optional external QWERTY/AZERTY or numeric keyboards backlight intensity press the FUNC key
and then the right arrow to increase the back light intensity or the left arrow to decrease the backlight intensity.

Adjusting the Volume

You can use the Quick Access Panel Speaker button to place the + (
level mode where you can adjust the volume level of the Internal and external speaker.
You can also:
Tap the >
1.
appears.
Volume and Sounds Properties Window
Figure 3-17
Adjust the volume slider as necessary using the pointer or the up and down arrow keys. Check the
2.
check boxes as desired.
sounds for
Tap to save the setting or tap
3. OK
NOTE To get to MAX volume level, both SW and function volume levels must be on loud.
If an external speaker is connected, the above controls its volume.
> >
Settings Control Panel
to exit without saving.
X
P1)
icon. The
Volume & Sounds
Operating the VC70 3 - 13
and - ( buttons into the audio volume
P2)
Volume & Sounds Properties
window
Enable